Roland TD-50 referenční manuál: podrobný průvodce a nastavení

Na TD-50 se zvuk při úderu na každou padu nazývá „instrument.“ A „drum kit“ je sada zvuků (nástrojů) přiřazených k padům. Drum kit 100…

Přehled a základy souborů a paměťí

Temporary memory (saved temporarily) The data (one song) recorded on the TD-50 is held in the unit’s temporary memory. The recorded data in temporary memory can be copied to an SD card, or exported as an audio file (WAV) or SMF data to an SD card.

Hi-Hat About Performance Techniques Playing method Explanation The TD-50 responds to a variety of performance techniques just like an acoustic drum set. The hi-hat tone changes smoothly and continuously Open/closed from open to closed in response to how far the pedal NOTE is pressed.

You can use the SELECT [ K ] [ J ] buttons to select a trigger input number, and use this button to audition the sound even if no [PREVIEW] button pads are not connected to the TD-50.

USB COMPUTER port p. 30 You can use DAW software to record your TD-50 performance as audio or MIDI, and you can play back sound from your computer through the TD-50.

Insert a commercially available SD card (SDHC cards (up to 32 GB) are supported).

Pripojení a rozložení na misce a hi-hat

Rear Panel (Connect Your Equipment) External sound module Footswitch Mixer Sampling pad or Mixer or amplified or other MIDI device other electronic speakers musical instrument

Pads Pads (digital connection) Jack Explanation [ L ] switch Press this switch to turn it on/off. AC IN jack Connect the included AC power code to this inlet.

If the auto-off function is set to “4 HOURS, ” the message setting screen might appear. For details, refer to “Settings for “WARNING: AUTO OFF, The TD-50 will turn off in 30 min.” will pads that support digital connection” (p. 9).

Práce s DRUM KIT a kanály

Use the [-] [+] buttons or the dial to set the Trig Type to VH11. While reading the meter displayed on the right side of the TD-50’s screen, adjust the offset with the VH-11’s VH offset adjustment screw. Adjust the offset so that the appear in the meter.

[-] [+] buttons. Use the faders to adjust the volume balance of the entire TD-50. By using the mixer (p. 22), you can adjust the volume balance of the pads in each kit. You can also stop all currently-playing performance sounds by using a pad or footswitch (p. 45).

Displej DRUM KIT a volba zvuku

About the DRUM KIT screen This is the TD-50’s main screen; it will appear when you press a Playing with the Click [DRUM KIT] button. 5 By outputting an audio file from the SD card as a click track, you can play a click along with the song (p. 15).

You can connect the TD-50 to your computer and play back Performing Along with an Audio Player Song sound from your computer. To adjust the volume of the click track, turn the [CLICK] knob. In the case of the example, you can use the [SONG] knob to adjust the volume of “TD-50.wav” and use the [CLICK] knob to adjust the volume of “TD-50_Click.wav.”

Trénink rytmu a oblíbené soubory

Rhythm Training (QUIET COUNT) Registering/Recalling Favorite Drum Kits (FAVORITE) The TD-50 provides a “Quiet Count” function that’s an ideal way to develop your sense of tempo. You can register frequently-used drum kits as “favorites” for instant recall. Quiet count is a training function that helps you keep the tempo.

Nahrávání a export dat

Recording Your Drum Performance Press the [ t ] button. Here’s how to record your drum performance. The RECORDER screen appears; the TD-50 is in record-standby condition. Recording Press the [F5] button to select “with SONG.”

Recording Turn knobs [R2] or [R3] to specify the export settings (only Renaming Recorded Data if exporting an audio file).

Parameter Explanation Here’s how to change the name of recorded data. By pressing the [ s ] button you can preview-play the In the SONG screen (p. Pad to edit The TD-50 lets you reproduce the way in which the sound of an instrument is affected by its shape and size.

Úpravy tónů a efektů

You can shape your sound in an intuitive way, just as if you were selecting a desired drum head and tuning it, or adding muffling (muting). Time 1-10 Time over which the attack changes Time 1-10 Time over which the attack changes

Attack -100-+100 Adjusts the attack Release -100-+100…

Customizing a Kit Sub instrument settings Layering Instruments (SUB INSTRUMENT) Use cursor buttons to select a parameter, and use the [-] [+] buttons or the dial to edit the value. Customizing a Kit Simulating the Ambience of a Performance Space (AMBIENCE)

Here you can adjust the volume of each pad and apply various effects to the sound. This simulates the reverberation or acoustics of a location in which you’re playing the drums (ambience).

Nastavení a jednotlivé komponenty TD-50

MEMO Adjusting the Overall Sound (MASTER COMPRESSOR/MASTER EQ) You can also set “Kit Volume” in the KIT SETTINGS screen (VOLUME tab).

Customizing a Kit Select “OK” and press the [ENTER] button. The current drum kit settings return to the settings of the drum kit unedited in SNAPSHOT. Press the [KIT] button to return to the DRUM KIT screen. You can temporarily save the currently-edited drum kit, and compare it with the current settings or revert back to it (snapshot).

Import a uživatelské vzorky a jejich správa

For each kit, you can change the illumination color of the [KIT] button and knobs. If the tempo of an individual drum kit is set differently than the overall tempo of the TD-50, an “*” is shown before the tempo. When you strike the pad of the number specified in MUTE SEND, the sound of…

[F3] (MIDI CH) button messages for each pad Here’s how to import an audio file into the TD-50 as a user sample. Select the pad that you want to edit (p. 20). Insert an SD card into the TD-50 (p. 8).

Správa a export uživatelských vzorků

Customizing a Kit Use the cursor buttons to select the import-destination number, and press the [F5] (IMPORT) button. Here’s how to view a list of all user samples that have been User Sample Exists!

Export a sdílení nastavení a set listy

Utility Functions Copy-source Copies from user memory. Utility Functions Press the [F5] (COPY) button. Recalling Drum Kits Successively By pressing the [F4] (EXCHANGE) button you can exchange user memories (USER only).

A confirmation message appears. You can specify an order in which drum kits are recalled in 32 steps (step 1 through step 32). Utility Functions Editing the steps of a set list Using Set Lists

Set List a tisk triggerů

Drum kit at this step The set list function turns on. Here’s how to make trigger settings so that the signals from the connection to a DIGITAL TRIGGER IN port, you’ll follow the screens pads can be accurately processed by the TD-50. adjust the trigger input to which the connected pad is assigned (p. Settings Making Detailed Settings for Digitally- Connected Pads

Hi-Hat a digitální nastavení

Because the following settings are automatically set to the appropriate values for each pad when you specify the trigger type (p. Settings Making Detailed Settings for Digitally- Connected Pads

If you are using a V hi-hat, adjust the offset on the TD-50. This is necessary in order to correctly detect open/close operations (p. Settings

Podrobnosti a informace o TD-50

You can view realtime information that shows the force (velocity) with which each pad is struck, how far the hi-hat is open, and the strike position on the snare, ride cymbal, toms, and AUX.

The first time that you connect a pad that supports digital connection You can connect the TD-50 to your computer, and record MIDI and Audio played back by operating system. SD Card Media Error! Failed to save recorded data.

Dotazy a opravy

Troubleshooting Problem Items to check Action Page Problems with sound Are the cables correctly connected to each pad and pedal? Check the connections. p. 9 Could the instrument be “OFF”? Assign an instrument. p. 19 p. 22 Could the instrument’s “Volume” be lowered? Adjust the instrument’s “Volume. Kick: KD series, KT series Acoustic Drum Trigger: RT series Drum Stand: MDS-50KV, MDS-50K

Obecné poznámky

* This document explains the specifications of the product at the time that the document was issued.

schematické rozložení TD-50 a kabeláže

Multi-Channel Output on a Roland TD-27 Kit.

tags: #roland #referencni #manual #td #50